WHAT ARE THE REQUIREMENTS FOR THE SITE OF THE RUNNING GROUND NETWORK BUMPER CAR AND BATTERY BUMPER CAR

2018-10-05 17:17:43 admin 1

Safety insurance measures: the passenger part of amusement equipment running in the air: the whole structure should be firm and reliable, and the important parts should be insured.

Hoisting part: the number of steel wire rope or chain used shall not be less than two. The connection to the seating area must be considered to be balanced when one is disconnected. Closed cockpit doors over 1m above ground: two locking devices or one secured locking device must be installed that cannot be opened by the passenger inside. The obstruction at the entrance and exit of the non-closed cockpit shall also be secured with a locking device. When the amusement equipment is in operation, the power supply is suddenly cut off or the equipment is in trouble, endangering the safety of passengers, automatic or manual emergency stop devices must be installed. After the failure of amusement equipment in operation, the measures should be taken to guide passengers.

Passenger safety binding device: when the amusement device is running, the passenger may be moved, collided or be thrown out or slid out of the ride object, the passenger binding device must be provided. For dangerous amusement equipment, two sets of independent binding devices should be considered when necessary. Safety belt, safety bar, baffle bar and so on can be adopted. The binding device shall be reliable and comfortable, and the parts in direct contact with the passenger shall be suitably flexible. The design of the binding device should be able to prevent some parts of the passenger from being injured by clamping or compression, should be easy to adjust, easy to operate. Seat belts should be used separately in facilities that swing slightly or move slowly without turning over and not being thrown out of danger. The seat belt can be used as an auxiliary restraining device for intense sports. When the amusement equipment is running, the passenger may be thrown out of danger, the corresponding type of safety pressure bar must be set. The safety bar itself must have sufficient strength and locking force to ensure that visitors are not thrown out or dropped, and remain locked until the device stops running.

Safety requirements for safety fence and platform: safety fence should be set in and out respectively, and guide fence should be set at the entrance. The platform should have anti-skid measures.

The opening direction of the security gate should be the same as that of the passenger (except in special cases). In order to prevent the hand injury caused by closing the door, the clearance between the door frame and the pillar should be appropriate, or other protective measures should be taken. The passenger's amusement equipment should not be higher than the platform 300mm. Other amusement equipment passenger part of the entrance and exit from the platform height, should be easy to up and down.

Other safety requirements: the amusement equipment shall be marked with safety marks where and where necessary. Safety signs can be divided into four types: prohibition signs (red), warning signs (yellow), instruction signs (blue) and prompt signs (green). No exposed sharp edges, sharp corners, burrs or dangerous protrusions are allowed where the passenger may reach them. Amusement equipment through the culvert, its inclusion surface should use not easy to fall off the material, such as decoration should be firmly fixed. The number of passengers must be marked and overloading is strictly prohibited.

Safety insurance measures: the passenger part of amusement equipment running in the air: the whole structure should be firm and reliable, and the important parts should be insured.

Hoisting part: the number of steel wire rope or chain used shall not be less than two. The connection to the seating area must be considered to be balanced when one is disconnected. Closed cockpit doors over 1m above ground: two locking devices or one secured locking device must be installed that cannot be opened by the passenger inside. The obstruction at the entrance and exit of the non-closed cockpit shall also be secured with a locking device. When the amusement equipment is in operation, the power supply is suddenly cut off or the equipment is in trouble, endangering the safety of passengers, automatic or manual emergency stop devices must be installed. After the failure of amusement equipment in operation, the measures should be taken to guide passengers.

Passenger safety binding device: when the amusement device is running, the passenger may be moved, collided or be thrown out or slid out of the ride object, the passenger binding device must be provided. For dangerous amusement equipment, two sets of independent binding devices should be considered when necessary. Safety belt, safety bar, baffle bar and so on can be adopted. The binding device shall be reliable and comfortable, and the parts in direct contact with the passenger shall be suitably flexible. The design of the binding device should be able to prevent some parts of the passenger from being injured by clamping or compression, should be easy to adjust, easy to operate. Seat belts should be used separately in facilities that swing slightly or move slowly without turning over and not being thrown out of danger. The seat belt can be used as an auxiliary restraining device for intense sports. When the amusement equipment is running, the passenger may be thrown out of danger, the corresponding type of safety pressure bar must be set. The safety bar itself must have sufficient strength and locking force to ensure that visitors are not thrown out or dropped, and remain locked until the device stops running.

Safety requirements for safety fence and platform: safety fence should be set in and out respectively, and guide fence should be set at the entrance. The platform should have anti-skid measures.

The opening direction of the security gate should be the same as that of the passenger (except in special cases). In order to prevent the hand injury caused by closing the door, the clearance between the door frame and the pillar should be appropriate, or other protective measures should be taken. The passenger's amusement equipment should not be higher than the platform 300mm. Other amusement equipment passenger part of the entrance and exit from the platform height, should be easy to up and down.

Other safety requirements: the amusement equipment shall be marked with safety marks where and where necessary. Safety signs can be divided into four types: prohibition signs (red), warning signs (yellow), instruction signs (blue) and prompt signs (green). No exposed sharp edges, sharp corners, burrs or dangerous protrusions are allowed where the passenger may reach them. Amusement equipment through the culvert, its inclusion surface should use not easy to fall off the material, such as decoration should be firmly fixed. The number of passengers must be marked and overloading is strictly prohibited.